LIP10-19MFLUX cored wire production line
Purpose: LIP10-19M flux cored wire production line is designed for production of flux cored wires of various designs and diameters from a steel strip and multicomponent burden materials.
fluxcored wire production line:
Purpose: LPP 1.8-3.5 flux cored wire production line is designed for production of flux cored wires of various designs and diameters from a steel strip and multicomponent burden materials
DrawbenchES:
Purpose: Drawbenches of the following dimensions-typesV-1/350, V-1/750,V-6/350,V-1/550M, V-1/650M, VN-2/550M, V2-550U, 1V-1/750 are designed for production of low- and medium-carbon steel wire from rolled wires.
STEEL calibration production line:
Purpose: LPM 2-3, LPM 4-5 wire drawing production lines are designed for production of low carbon wire from non-etched rolled wires.
wire drawing production line:
Purpose: LPM 2-3, LPM 4-5 wire drawing production lines are designed for production of low carbon wire from non-etched rolled wires.
Drawbench With roller die:
Purpose: VFR-4 drawbenches with roller die are designed for rolling-drawing of steel shaped sections.
NONFERROUS METALS AND THEIR ALLOYS WIRE AND RODS DRAWING MILLS mills
Drawbenches:
Purpose: VN-8A, VN-10A drawbenches are designed for production of aluminum wire from rolled wire by repeated drawing with accumulation and winding of finished goods by winding machine to the coils.
Purpose: VSK-9M, VSC-13M, VSK-15 drawbenches are designed for repeated slip drawing of copper wire from rolled wire, arrangement of drawing cones - stepped.
Purpose: SMV-1-5M, SMV-1-9MCh drawbenches are designed for production of copper wire from rolled wire by repeated slip drawing and winding of round and shaped section wire by the winding machine.
Purpose: VSP-5 drawbenches are designed for production of copper wire from rolled wire by repeated drawing with sliding and winding of finished products by winding machine.
AUXILIARY EQUIPMENT FOR DRAWBENCHES::
unwinding device:
Purpose:RK-1/500-1000, RK-1/2600M, RB-2/1800 unwinding devices are designed for wire unwinding from coils of varying capacity fed to the drawing machines.
Purpose: RK-12/1000V, RK-12/2600V, RK-24/1000V, RK-24/500-1000, RK-36/1000, RM-12/250-600 unwinding devices are designed for unwinding of steel wire from coils of various capacity fed to the unit.
winding, unwinding MACHINES:
Purpose: NK-1/500-1000, NK-1/2600M, NB-1/1000 winding machines are designed for winding low-carbon and high-carbon steel wire to the coil, fed from drawing mills.
Purpose: NB-12/1200, NB-12/2000, NB-24/1200, NBN-24/400, NBN-24/600, NK-14/1000, NK-24/10, NK-24/25, NK-24/500, NK-24/1000K, NK-24/1000R, NK-24/1000KP, NKN-36/1000 winding machines are designed wire pulling through various process units, such as thermal units, coating units, etc. n., and winding of finished wire into coils on the sectional coils.
Purpose:RNK-6/2500, RNK 12/10, RNK-12/2500, RNK-18-2600P, RNK-24/1000 unwinding and winding machines are designed for unwinding of high-strength wire and rolled wire from coils of various capacity, pulling through various process units, such as thermal units, coating units, etc., and winding of finished wire on split coils of the same volume.
ACCESSORIES:
Pointing and lasting machines: OZK-4-200; OZK-10-300
Rope winding machine: PT-1/2500M
Exhaust mechanisms: VM-24/200M; VM-24/400, VM-24/600
Spools tilters: KSh-1000; KSh-2600
Reinforcing wire stabilization line: LSAP 5-8